RS2600PAT Online Raman Multi-Gas Analyzer For Industrial Application
Safety Meets Precision: The Non-Contact Advantage in Hostile Environments
Analyzing highly corrosive, reactive, and toxic gases like PF₅, HF, and POF₃ has traditionally been a dangerous ballet of sampling cylinders, heated lines, and potential leaks. This introduces significant safety hazards, maintenance headaches, and analytical delays that defeat the purpose of real-time control. The process itself becomes a risk factor.
The JINSP RS2600PAT Online Raman Analyzer shatters this paradigm with its truly in-situ, non-contact measurement principle. The laser probe is positioned safely outside a sight glass or window, analyzing the gas in the pipe without ever extracting it. There are no sample cells to clog, no transfer lines to heat or leak, and no risk of exposing personnel to hazardous gases during maintenance or calibration.
Engineered for the Harshest Conditions: Built specifically for fluorine and specialty chemical environments, the RS2600PAT withstands the application's demands. This direct measurement eliminates the "sampling gap"—the time and potential composition changes that occur between the process and an external analyzer. You get a real-time, unaltered truth about your process stream. This robust and safe design ensures unparalleled reliability and uptime, making continuous process optimization not just a theoretical goal but a practical, safe, and sustainable reality. Reduce operational risk while gaining superior process insight.
Technical Highlights:
- Multi-component: simultaneous online analysis of multiple gases
- Universal: >500 types of gases are detectable except noble gases
- No need for pressure control: Quantification is not affected by changes in sample gas pressure
- Rapid response: Complete a single detection within seconds
- Wide quantitative range: detection limit is as low as ppm level, and the measurement range can be as high as 100%
Technical Specifications:
| Components | N2, H2, O2, CO, CO2, H2S, CmHn, etc. |
| Analysis time | 2 seconds |
| Measurement uncertainty | ≤0.2% |
| Laser excitation wavelength | 532 ± 0.5 nm |
| Spectral coverage | 200 ~ 4200 cm-1 |
| Spectral resolution | ≤8 cm-1 at full spectral range |
| Air circuit interface | 6 mm standard tube fitting (3 mm, 1/8’’, and 1/4’’ are optional) |
| Explosion-proof | ExdbebibmbpxbIICT4Gb / ExtbibmbIIICT135ºCDb |
| Input voltage | 100~240 VAC,50~60 Hz |
| Sample gas temperature | -20 ºC ~ 55 ºC |
| Sample gas pressure | ＜1.0 MPa |
| Unit dimensions | 750 mm (Width) × 900 mm (Height) × 1400 mm (Depth) |
| Weight | 250 kg |
Main Features:
- Quantitative model of multiple standard curves, combined with the chemometric method, establishes the relationship between the spectral signal (peak intensity or peak area) and the content of multi-component substances.
- Changes in sample gas pressure and test conditions do not affect the accuracy of quantitative results.
- No need to establish a separate quantitative model for each component.
Field of Applications:
- Petrochemical field: Quantitative analysis of different Elements in Petrochemical Natural Gas
- As a mixture of hydrocarbon components, the accuracy of qualitative and quantitative analysis of natural gas components directly affects the quality index of natural gas - calorific value.
- Fluorine chemical industry: Detection of components in reaction and emitted gases of fluorine materials ; Monitoring of F2 , N2 , HF and other components in the fluorination process.
- Metallurgical field;
- Isotope gases.
- Detection of Impurity Gases in Electronic Special Gases.
Usage/implementation:
Through valve control, it can achieve the following functions:
- Monitoring the content of each component in the raw gas.
- Alarm notification for impurity gases in the raw gas.
- Monitoring the content of each component in the synthesis reactor tail gas.
- Alarm notification for the excessive emission of hazardous gases in the synthesis reactor tail gas.
Company Introduction:
JINSP – Advanced Spectral Detection for Demanding Industries
Need high-accuracy Raman or LIBS solutions? JINSP Company Limited brings 17 years of expertise, 200+ patents, and full ISO compliance to deliver certified detection systems. Based in Beijing with a Jiangsu production base, we support clients with CE, ECAC, IP Level, and transport safety certifications. From security checkpoints to lab analysis, JINSP’s technology is globally trusted.
FAQ:
Q1: This is the first time I use it, is it easy to operate?
A1:We will send you a manual and guide video in English, it can teach you how to operate the spectrometer. Also, our technicians will offer professional technical operation meetings.
Q2: Can you offer an operation training?
A2: Your technicians can come to our factory for training. Jinsp engineers can go to your place for local support ( installation, training, debugging, maintenance ).
Q3: How to receive the best price in the shortest time?
A3: When you send us an inquiry, please kindly offer details with wavelength, detector, effective pixels, focal length, and so on. We will send you a quotation with details soon to your email.
Q4: What about quality assurance?
A5:We have a quality inspection team. All goods will go through quality inspection before shipment. We can send you pictures for inspection.
Product Tags:
|
|
Tame the Corrosive: In-Situ Raman Analysis for PF₅ & HF Without Sampling Risks Images
|
